LCD plastic pendulum impact testing machine
Current Category： Specialized testing machine
Purpose and characteristics: This machine is a testing instrument for testing the impact resistance of non-metallic materials such as plastic, nylon, rubber, fiberglass, composite plastic pipes, and electrical insulation materials under dynamic loads. This machine can perform both simply supported beam tests and cantilever beam tests. With accessories such as tensile impact supports, T-shaped heads, and tensile impact pendulums, it can also perform tensile impact tests on plastics at higher deformation rates; After being equipped with pipe impact supports, pipe impact tests can be conducted; After being equipped with cast iron impact bearings, cast iron impact tests can be conducted; One machine with multiple uses and high cost-effectiveness.
Main technical parameters:
Maximum impact energy: 50J for simply supported beam
(Optional simply supported beam pendulum 50/25/15/7.5/4/2/1/0.5)
(Optional cantilever beam pendulum 22/11/5.5/2.75/1)
2. Pendulum torque: 26.7949N · m for simply supported beam
Angle resolution: 0.1 º
Technical parameters of simply supported beam:
Impact speed: 3.8m/s
Distance from the center of the pendulum axis to the center of the specimen: 395mm
Impact knife angle: 30 º
Impact knife fillet radius: 2mm
Bearing fillet radius: 1mm
Front angle of support: 0 º
Rear angle of support: 10 º
Support span: 40mm
Sample specifications: 55mm × 10mm × 10mm 10 (7.5, 5, 2.5) mm
Host dimensions (length x width x height): 740mm x 260mm x 870mm
Host weight: approximately 100kg
Host power supply: AC single-phase 220V 50Hz 0.5kW
