2000 series microcomputer controlled electronic universal testing machine
Current Category： Electronic Universal Tester
Specifications
20N-5KN (can achieve 0N-5KN with added sensors)
Purpose:
Mainly used for tensile, peel, tear and other tests in industries such as yarn fibers, wires and cables, paper, composite materials, waterproof materials, metal wires, aluminum-plastic pipes, springs, tapes, etc.
Applicable standards:
International standards such as GB, ISO, DIN, ASTM, JIS, etc.
This model can not only perform tensile tests, but also compressive tests.
|
Equipment specifications and models |
2000 series |
||||||
|
CMT2102 |
CMT2202 |
CMT2502 |
CMT2103 |
CMT2203 |
CMT2503 |
||
|
C21.102 |
C22.102 |
C25.102 |
C21.103 |
C22.103 |
C25.103 |
||
|
Maximum test force |
100N |
200N |
500N |
1KN |
2KN |
5KN |
|
|
Load sensors with different ranges of 5N~600KN can be selected according to customers, ranging from small to micron sized fiber filaments, to large to fully loaded structural components, plastic samples, metal sheets, metal bars, etc. |
|||||||
|
Device Name |
Single column desktop electronic universal testing machine |
||||||
|
Accuracy level |
Level 0.5 |
||||||
|
Measurement parameters |
Test force measurement range |
0.4%~100% FS (full scale) |
|||||
|
Test force indication error |
indication of± Within 0.5% |
||||||
|
Test force resolution |
1/500000 of the maximum test force, without grading throughout the entire process, and with constant resolution throughout the entire process |
||||||
|
Sampling frequency |
Not less than 60HZ |
||||||
|
Deformation measurement range |
0.2%～100%FS |
||||||
|
Deformation indication error |
Indication of± Within 0.5% |
||||||
|
Deformation measurement resolution |
1/500000 of the maximum deformation, with no grading throughout the entire process and unchanged resolution throughout the entire process |
||||||
|
Host section |
Host test space |
Single space |
|||||
|
Motor |
Foreign well-known brand exchanges servo motors |
||||||
|
Sensor |
Transcell force transmission sensor from the United States |
||||||
|
Control system |
Criterion Test fully digital three loop testing machine control system |
||||||
|
Measurement and control software |
Criterion Test Full Digital Three Loop Testing Machine Measurement and Control Software |
||||||
|
Optional accessories |
Axial extensometer |
For detailed parameters, please refer to the "Specific Solution" |
|||||
|
Lateral extensometer |
For detailed parameters, please refer to the "Specific Solution" |
||||||
|
Large deformation |
For detailed parameters, please refer to the "Specific Solution" |
||||||
|
Sensor |
Each device can be equipped with multiple sensors, but none of them can exceed the maximum allowable loading range of the host |
||||||
|
Digital dial indicator |
Used for specialized compression and bending fixtures, measuring modulus with a digital micrometer |
||||||
|
Digital caliper |
Used for measuring sample size, can be automatically read by software, measurement range 0-200mm |
||||||
|
Grating ruler |
Used for measuring deformation in spring compression tests |
||||||
|
Special fixtures |
Special fixtures need to be specially designed according to user requirements |
||||||
|
Host parameters |
Dimensions |
500mm× 450mm× 1500mm |
|||||
|
Effectively stretches space (excluding stretching fixtures) |
700mm |
||||||
|
Power supply |
220V/50Hz，± 10% |
||||||
|
Power |
400W |
||||||
|
Host weight |
Approximately 120Kg |
||||||
